Live Roofing Desk34 active storm alerts

    The industry

    Installation & Repair · PRACTICE

    Repair Manual for Low-Slope Membrane Roof Systems

    NRCANRD reference

    Repair Manual for Low-Slope Membrane Roof Systems — Asphalt Roofing Manufacturers Association, National Roofing Contractors Association and SPRI (joint publication), 1997.

    Source: Asphalt Roofing Manufacturers Association, National Roofing Contractors Association and SPRI (joint publication) · · 1997

    • Asphalt Roofing Manufacturers Association, National Roofing Contractors Association and SPRI (joint publication)
    • Installation & Repair
    • repair
    • manual
    • low-slope
    • membrane
    • roof
    • systems

    This browser does not display PDFs inline. The document is unchanged — download it or open it in a new tab with the buttons above.

    What this document argues

    A joint publication of ARMA, the NRCA and SPRI, addressed to the professional roofing contractor and organised by membrane type — built-up, modified bitumen, thermoplastic and thermoset — with each repair procedure on its own page so it can be pulled and handed to a crew. Its framing argument is that a repair fixes the problem and not the symptom, and it sorts work into three levels: spot patching of isolated defects, general repairs across the field and flashings, and major repairs paired with maintenance coatings. It is explicit that a repair should be designed to the membrane's remaining service life rather than built past it.

    Why a contractor cares. This is the trade's own procedural record of how a permanent repair is made on each membrane type — the document behind a defensible repair scope.

    Why a public adjuster cares. Whether a low-slope roof can be repaired or must be replaced is the whole argument on a commercial loss. Three associations agreeing on when spot patching is and is not appropriate outweighs an adjuster's assertion.

    A summary written by the National Roofing Directory, not an extract. The work itself is Asphalt Roofing Manufacturers Association, National Roofing Contractors Association and SPRI (joint publication)'s and is not reproduced here.

    Provenance · Obtained from publicly circulated copies; no ownership claimed; removal honored on request

    Source restriction · FILENAME UNDER-CREDITS THE PUBLISHER — this is a three-association publication, not NRCA's alone. Copyright page verbatim: "Published by the Asphalt Roofing Manufacturers Association, the National Roofing Contractors Association and SPRI. ©1997 by the Asphalt Roofing Manufacturers Association, the National Roofing Contractors Association and SPRI. All rights reserved. Published 1997. Printed in the United States of America." *** RESTRICTION stamped on every page, verbatim: "© NRCA Reprint permission granted to Robert Manson at Delta Engineering & Inspection Inc. . No further reproductions auth

    Every document here names its publisher. Documents were gathered from public circulation and are posted in good faith with attribution — no ownership is claimed, nothing is sold, and rights holders can have anything removed on request. Read the content notice

    More from Installation & Repair

    On the same shelf

    Manufacturer bulletinPDF · 2 pages · 174 KB

    GAF TAB-C 2015-31: Repairing Hail Damage to Granule-Surfaced Membranes

    GAF's commercial technical advisory bulletin on hail that scours granules off a granule-surfaced membrane: what to inspect for, when coating the membrane is an acceptable repair, and the Diamond Pledge guarantee question that follows a coating repair.

    GAFGAF Technical Services · 2015

    Manufacturer bulletinPDF · 2 pages · 239 KB

    GAF TAB-R-178: Mixing New and Aged Asphalt Shingles

    GAF's bulletin on whether new shingles can be used to repair an aged roof — it allows it when dimensions and exposure match, warns that a perfect color blend is "not likely," forbids trimming shingles to match, and notes aged shingles crack during repair. Central to matching disputes.

    GAFGAF Residential Consumer Services · 2025

    Manufacturer bulletinPDF · 1 page · 574 KB

    GAF TAB-R 2017-164: Underlayment Requirements for Hips and Ridges on a Single-Plane Repair

    One-page GAF bulletin on how underlayment must be lapped over a hip when only one roof plane is being replaced, including removing end nails on the adjacent plane and re-nailing — the detail that turns a single-slope repair into work on the neighboring slope.

    GAFGAF Technical Services · 2017

    Back to the full library