Live Roofing Desk41 active storm alerts

    The industry

    Installation & Repair · Starter & hip/ridge

    Owens Corning Technical Bulletin: Hip & Ridge and Starter Requirements for Limited Lifetime Coverage

    Owens CorningManufacturer bulletin

    Owens Corning's bulletin confirming that its limited lifetime warranties require Owens Corning starter strip and hip-and-ridge products, and stating that an inverted three-tab or cut laminate used as starter is not acceptable because it puts the sealant in the wrong place.

    Source: Owens Corning · Manufacturer bulletin · 2019

    • Owens Corning technical bulletin
    • starter strip
    • hip and ridge shingles
    • limited lifetime warranty
    • Duration shingles
    • sealant placement
    • wind performance
    • cut three tab starter
    Download PDFOpen in a new tabPDF · 2 pages · 2.7 MB

    This browser does not display PDFs inline. The document is unchanged — download it or open it in a new tab with the buttons above.

    From the document

    TB-10023709-BW TECHNICAL BULLETIN THE USE OF HIP & RIDGE AND STARTER WITH LIMITED LIFETIME SUPERSEDES PREVIOUS BULLETINS

    Issue Description: This bulletin confirms requirements for the use of Owens Corning® Starter Shingles and Owens Corning® Hip & Ridge shingles to maintain lifetime coverage per the terms of the Owens Corning Limited Warranties*, which cover product manufacturing defects. These warranties state that any issues resulting from improper or faulty installation of shingles are not covered, and that installation must be in accordance with our written installation instructions and comply with local building codes.

    Starter Shingles: The application instructions for all Owens Corning shingles with a Limited Lifetime Warranty including Oakridge® Shingles, all Duration® Series Shingles, and WeatherGuard® HP Shingles call for the use of an Owens Corning® Starter Strip product. These products include Owens Corning® Starter Strip, Owens Corning® Starter Strip Plus, and Owens Corning® Starter Shingle Roll. These products are designed for use along the eave and rake edge, and when installed correctly, assure correct position of sealant and joints to protect against wind and water infiltration.

    Figure A: Starter Strip Installation Figure B: Alternate Method

    As an alternate method, trimming laminates as shown in Figure B is also acceptable.

    The use of a laminate shingle or a three-tab shingle upside down as a starter is not acceptable. This will place the sealant bead in the wrong location, compromising wind performance at the eave.

    Additionally, cutting the tabs off of three tab shingles for use as a starter is not acceptable for a roof on which laminate shingles will be installed. Using cut three-tab shingles in this way will result in offset problems due to the length difference between three-tab and laminate shingles. Eventually, the vertical joints will line up with the first course of shingles above and create potential for a leak.

    Please contact 419-248-6557 for additional information. OWENS CORNING SCIENCE AND TECHNOLOGY, LLC ONE OWENS CORNING PARKWAY Email: [email protected] TOLEDO, OHIO 43659 1-800-GET-PINK® Disclaimer of Liability www.owenscorning.com Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Pub. No. 10023709-BW. Printed in U.S.A. August 2019. THE PINK PANTHER™ & © 1964-2019 Owens Corning makes no representation about, and is not responsible or liable for the accuracy or Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered reliability of data associated with particular uses of any product described herein. trademark of Owens Corning. © 2019 Owens Corning. All Rights Reserved.

    TB-10023709-BW TECHNICAL BULLETIN THE USE OF HIP & RIDGE AND STARTER WITH LIMITED LIFETIME 10023709-BW – SUPERSEDES PREVIOUS BULLETINS

    Hip & Ridge Shingles: The application instructions for all Owens Corning® shingles with a Limited Lifetime warranty, including Oakridge® Shingles, all Duration® Series Shingles, and Weatherguard® HP shingles call for the use of an of an Owens Corning® Hip & Ridge Shingle. Owens Corning makes a variety of Hip & Ridge shingles which are specially formulated to be bent over a ridge and are designed to perform in that position as part of a Lifetime roof system. Furthermore, all Owens Corning® Hip & Ridge Shingles are made to match the color of the field shingles and resist wind uplift. The ridge area is especially vulnerable to high winds and Owens Corning® Hip & Ridge Shingles are tested and warranted per the terms of the warranty for wind performance for use in that location.

    The use of scrap laminate shingles as ridge cap is not acceptable. Laminate shingles are designed for installation on a flat surface and will not bend properly over a ridge.

    The use of three-tab shingles as ridge cap also does not meet the requirements of a lifetime roof system as they carry a maximum 25-year product limited warranty. In addition, three-tab shingles only provide a 60 mph wind resistance warranty which falls far short of the 110 mph or 130 mph wind resistance warranty provided by Owens Corning® Hip & Ridge Shingles.

    *See actual warranty for details.

    Please contact 419-248-6557 for additional information. OWENS CORNING SCIENCE AND TECHNOLOGY, LLC ONE OWENS CORNING PARKWAY Email: [email protected] TOLEDO, OHIO 43659 1-800-GET-PINK® Disclaimer of Liability www.owenscorning.com Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Pub. No. 10023709-BW. Printed in U.S.A. August 2019. THE PINK PANTHER™ & © 1964-2019 Owens Corning makes no representation about, and is not responsible or liable for the accuracy or Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered reliability of data associated with particular uses of any product described herein. trademark of Owens Corning. © 2019 Owens Corning. All Rights Reserved.

    An excerpt from the opening of the document, reproduced here so it can be read and searched. Owens Corning holds the rights to the full work. The complete document is above.

    Every document here names its publisher. Documents were gathered from public circulation and are posted in good faith with attribution — no ownership is claimed, nothing is sold, and rights holders can have anything removed on request. Read the content notice

    More from Installation & Repair

    On the same shelf

    Manufacturer bulletinPDF · 2 pages · 174 KB

    GAF TAB-C 2015-31: Repairing Hail Damage to Granule-Surfaced Membranes

    GAF's commercial technical advisory bulletin on hail that scours granules off a granule-surfaced membrane: what to inspect for, when coating the membrane is an acceptable repair, and the Diamond Pledge guarantee question that follows a coating repair.

    GAFGAF Technical Services · 2015

    Manufacturer bulletinPDF · 2 pages · 239 KB

    GAF TAB-R-178: Mixing New and Aged Asphalt Shingles

    GAF's bulletin on whether new shingles can be used to repair an aged roof — it allows it when dimensions and exposure match, warns that a perfect color blend is "not likely," forbids trimming shingles to match, and notes aged shingles crack during repair. Central to matching disputes.

    GAFGAF Residential Consumer Services · 2025

    Manufacturer bulletinPDF · 1 page · 574 KB

    GAF TAB-R 2017-164: Underlayment Requirements for Hips and Ridges on a Single-Plane Repair

    One-page GAF bulletin on how underlayment must be lapped over a hip when only one roof plane is being replaced, including removing end nails on the adjacent plane and re-nailing — the detail that turns a single-slope repair into work on the neighboring slope.

    GAFGAF Technical Services · 2017

    Back to the full library